Turck & Car center

  The maintenance of the high-altitude operating truck chassis is very important. The chassis ensures the safety of the truck and the owner. Once rusted and corroded, the structure of the entire truck will become loose, causing safety hazards. Many traffic accidents are caused by loose chassis. Therefore, to prevent problems before they happen, it is essential to make armor for the chassis. 1. The bottom tray should be washed frequently and rinsed well. Normally, high-altitude operation trucks are sprayed with anti-rust primer when they leave the factory, but they will slowly oxidize after a period of time. The armor is to basically reinforce the chassis, wash the chassis thoroughly, and then spray the chassis with elastic plastic Material, thereby sheltering the chassis. 2. The baking of the ground surface, the intrusion of rain, and the moisture and salt in the atmosphere all corrode the bottom of the truck, which is the cause of the aging of the truck chassis. The continu...

The main cause of hydraulic oil emulsification on concrete mixer truck s is water in the hydraulic system, which is mixed with water after a long time. The removed hydraulic oil will form an emulsification of the hydraulic oil. We found that water enters the hydraulic system due to the following reasons: a. Working in a humid environment, the moisture in the air condenses due to the alternation of cold and heat, turning into water droplets and falling into the oil; b. The rainwater on the fuel tank seeps into the fuel tank due to the weak sealing of welding and connection parts; c.  Due to the damage of the pumping cylinder seal and the damage of the mixing motor, moisture is brought into the oil; d. Daily maintenance, cleaning, oil change, and maintenance process bring in moisture. To prevent the oil from emulsifying, we must first prevent moisture from entering the hydraulic system. When the car leaves the factory, the welding and connection parts must be manufactured in accord...

  The sprinkler truck is a water tanker composed of rust-proof water, power take-off, transmission shaft, spraying system, working platform, special sprinkler pump, pipeline, etc. installed on the second-class automobile chassis. The most commonly used are sanitation sprinklers truck and green sprinklers truck . There are three major categories of fire sprinklers. Next, CLVEHICLES.COM will briefly tell users the difference between sanitation sprinklers, green sprinklers, and fire sprinklers. First, let's take a look at the configuration and functions of the sanitation sprinkler truck. The sanitation sprinkler has a standard configuration, so it is also called: the standard sprinkler, which is mainly equipped with a self-priming and self-draining special sprinkler pump, with a suction range of 7 meters and a lift. 65 meters, with front flush, back spray, side spray, high-pressure water cannon, fire hydrant inlet, etc. The high-pressure water cannon can rotate 360 degrees and has ...