Turck & Car center

 The generator is an important part of the LED advertising truck , and it is the power supply system of the whole truck. Except for the fixed-point parking of our advertising vehicles and plugging in an external power cord for playback, our generators are needed for power supply at other times. Therefore, in order to do a good job in advertising, we must pay special attention to the maintenance of our advertising truck generators. So how do we maintain our LED advertising truck generator? First of all, we have to regularly check the generator of our advertising truck, especially the inspection of the generator oil, and change the oil frequently. Take out the oil dipstick 20 minutes after it is not started or shut down, wipe the oil dipstick with a clean rag or paper towel, reinsert it into the oil hole for 10 seconds, and then take it out to ensure that the oil reaches the middle and upper parts of the lower and upper marks on the oil dipstick. Secondly, we need ...

  CLVEHICLES.COM has a tank body welding process for fuel tanker truck . Many users who use oil tankers must also want to know how the tanker is made. Now I will introduce the welding of the oil baffle. Welding of the oil baffle plate of the refueling truck: the main work is the welding of the oil baffle plate in the cylinder body. According to the above, three oil baffle plates are generally arranged inside the 6M long cylinder body, and the cylinder body is divided into four compartments. Each oil baffle plate The plate must be intermittently welded with the cylinder body. If it is a separate tank, the oil baffle will be replaced by a partition, and continuous welding must be carried out. The length of each girth weld is based on the aforementioned 6-7.5M length. The continuous welding is calculated according to half of the welding length. The total welding length of this station is about 20M, and the welding speed is calculated at 5mm/s. The welding time is about...