跳至主要内容

How to Maintain Your Undercarriage Parts ?

 Undercarriage parts have a huge effect on working performance and walking performance of excavator. Maintenance is a key to walking speed of excavator. How to maintain your “undercarriage parts”? There are some tips as following.


1. Carrier Roller is above the track frame. The function is to carry and keep the track moving in a straight line. If Carrier Roller has a breakdown, Track Link will not work properly. Carrier Roller is added lubricating oil at once. If oil spills occur, you will have to replace this part. Therefore, you should keep the track frame clean. Don’t let the accumulation of dirt and gravel hamper its work.

2. Front Idler is in the front of the track frame. The function is to prop the track up and guide the track to wind correctly. Besides, Front Idler and Track Adjuster work together to maintain a certain degree of tension on the track. So during working and walking, should keep Front Idler running ahead, which can avoid the wear of the track. Meanwhile, Track Adjuster can reduce the vibration and shedding of the track during walking.

Excavator Undercarriage Parts3. Sprocket is in the back of the track frame. Because it is fixed on the track frame, it has no shock absorption function. If sprocket moves forward, it will not only cause the abnormal wear of Sprocket and the track, but also have adverse effects on the track frame. The track frame may have early cracking.

4. During working, Track Roller can’t be immersed in mud for a long time. After working, should support the track on one side. Then, Drive walking motor to get rid of dirt and gravel. In winter, should keep Track Roller dry because there is a floating seal between the outer roller of Track Roller and the shaft. If there is water, it will freeze at night. When the excavator is walking the next day, the floating seal is in contact with ice to cause oil spill. When Track roller is damaged, can cause many faults, such as walking deviation, walking weakness and so on.

5. The track motor guard can protect the motor. However, the dirt and gravel also can enter the interior, which making the oil tube of the motor wear out. Moisture in the dirt will corrode the joint of the oil tube, so regularly open the guard and clean up the dirt inside.
标签：

评论

发表评论

此博客中的热门博文

The Maintenance of LED Advertising Truck

 The generator is an important part of the LED advertising truck , and it is the power supply system of the whole truck. Except for the fixed-point parking of our advertising vehicles and plugging in an external power cord for playback, our generators are needed for power supply at other times. Therefore, in order to do a good job in advertising, we must pay special attention to the maintenance of our advertising truck generators. So how do we maintain our LED advertising truck generator? First of all, we have to regularly check the generator of our advertising truck, especially the inspection of the generator oil, and change the oil frequently. Take out the oil dipstick 20 minutes after it is not started or shut down, wipe the oil dipstick with a clean rag or paper towel, reinsert it into the oil hole for 10 seconds, and then take it out to ensure that the oil reaches the middle and upper parts of the lower and upper marks on the oil dipstick. Secondly, we need ...
发表评论
阅读全文

Welding Process of Fuel Tank Truck

  CLVEHICLES.COM has a tank body welding process for fuel tanker truck . Many users who use oil tankers must also want to know how the tanker is made. Now I will introduce the welding of the oil baffle. Welding of the oil baffle plate of the refueling truck: the main work is the welding of the oil baffle plate in the cylinder body. According to the above, three oil baffle plates are generally arranged inside the 6M long cylinder body, and the cylinder body is divided into four compartments. Each oil baffle plate The plate must be intermittently welded with the cylinder body. If it is a separate tank, the oil baffle will be replaced by a partition, and continuous welding must be carried out. The length of each girth weld is based on the aforementioned 6-7.5M length. The continuous welding is calculated according to half of the welding length. The total welding length of this station is about 20M, and the welding speed is calculated at 5mm/s. The welding time is about...
发表评论
阅读全文

Functional Requirements For Truck Mounted Crane

  General truck mounted crane   have the following functional requirements: 1. The crane can be easily transferred with the truck, meeting the requirements of mobility, flexibility and no need for power supply in field operations. 2. The outrigger mechanism can lift the whole vehicle when the truck-mounted hoisting and transport vehicle is carrying out the lifting operation, so that all the tires of the car are off the ground, free from the direct operation of the lifting load, and the supporting state of the hydraulic outriggers can last for a long time. Keep the position unchanged to prevent soft legs when lifting heavy objects. 3. The length and depression angle of the boom can be adjusted, balanced and locked arbitrarily within a certain range to meet the requirements of different lifting operations. 4. The jib of the truck-mounted hoisting and transporter can be rotated and locked arbitrarily within 360 degrees. 5. The   truck-mounted hoisting truck   can lift t...
发表评论
阅读全文